How to update Samsung Galaxy Note 10.1 to the 2014 Edition Android KitKat – Hi-Tech News

Samsung has started to distribute update Android 4.4.2 KitKat tablet Galaxy Note 10.1 2014 Edition with support for Wi-Fi (SM-P600). Pack Size – 549 MB, you can install it over the air via Wi-Fi or manually via Odin 3.09

how to update Galaxy Note 10.1 to the 2014 Edition KitKat with a computer:

1. Make sure that the model number of your tablet SM-P600 (specify number can be in the system settings). Copy important files from the device in a safe place or make a backup of data and applications.

2. Connect the tablet to the computer based on Windows USB-cable – will automatically install the drivers. After the drivers are installed, disconnect the cable.

3. Disable antivirus on your computer.

5. Download Odin3 3.09 and extract it to any folder on your computer.

6. Unplug the tablet and restart mode Download. To do this, press and hold the volume key subtraction, home pages and inclusion.

7. Open the folder where you copied the file and run Odin3 Odin3.exe. Make sure that the «Re-Partition» is not checked.

8. Click on the «AP» or «PDA» and select the firmware file of the firmware file, with expanded. Tar.md5.

9. Connect the tablet to the computer USB-cable and after the message «ADDED», click «Start». If the message «ADDED» does not appear, install the tablet driver on your computer again.

10. After installation is complete, the tablet will automatically reboot. It is desirable to go in and reset rekaveri device to factory settings. To do this, press and hold both the volume and power button. In the Run rekaveri select «Wipe data / factory seset», then press «Reboot system now».

The update adds a new notification bar plate, another task manager, changes in the multiscreen, print-on Wi-Fi, access to the camera from a page lock, and more. With a list of general innovations in Android 4.4 is available here.